How do you assemble the Hook-On Chair?

Dove Rios Updated by Dove Rios

1. (Skip step unless assembling after a wash) Reassemble the top frame after washing:

If you’ve just washed the seat cover, you’ll need to reinsert the aluminum frame into the fabric tube at the top of the chair. Thread it through the plastic connectors on the front of the seat. Make sure one metal button faces down and the other faces inward.

2. Attach the hook-on arms:

  • Ensure the plastic connectors are threaded onto the aluminum frame.
  • Slide the hook-on arms onto the frame until you hear a click. The metal button should pop into place.
  • Take the footrest straps and loop them around the bottom of the hook-on arms. Snap to secure.

3. Secure the chair to a table:

  • Check our Safety Guidelines (link safety guideline) or Warning Page of your manual first, to make sure your table is compatible.
  • Loosen the grips underneath the hook-on arms.
  • Slide the arms over the tabletop so they rest flat on top, with the grips underneath.
  • Turn the grips counterclockwise until tight.
  • Test the chair’s stability by pulling it down and back - tighten more if needed.
  • Once secure, zip and snap the fabric panels around the arms.

4. Place your little one in the seat:

  • Seat your child with their legs through the leg holes.
  • Bring up the crotch strap and secure each side of the waist belt to the buckle on the crotch strap
  • Adjust straps so they fit snugly around your little one.
  • Adjust the footrest height using the snaps on the strap.

    5. Attach the silicone tray:
    • Place the silicone tray on the table surface so that the bumps on the tray align with the chair’s arms.
    • Ensure the hard plastic part underneath the bumps is resting on the aluminum frame.
    • Push down firmly until the tray snaps into place over the top grips.

How did we do?

How do you adjust the footrest?

How do you remove the Tray?

Contact